Recent content by Red Power

I have a 1999 Kubota F2560 with a Curtis hard shell cab. My cab has a serious case of surface rust that has compromised the strength of some of the panels. Does anyone have a cab or parts of a cab that would work. Or can anyone tell me where I could look for panels for my cab. Please PM me...

Thanks for the suggestions. We mow grass along the road sides around the fields on our farms(@ 15 acres of grass). Field work is more important than cutting grass so it got out of hand. We generally use a Farmall A with a belly mount mower. We mow this grass roughly once a month but first...

I have a Kubota F2560 with a RCK60-F30. The standard blade is part # K5651-34330. The measurements are: 20.5" long, 2.5" wide, .240" thick, and center hole 1.125" in diameter. The mower cuts good until I get into really tall grass, clover or thick dandilions. Then the grass etc. doesn't...

The engine doesn't vibrate independently from the frame, the mounts appear solid. The sides of the hood when down "flap" and the lock pin on the left side jumps up and down even with the spring tension. The whole back of the tractor vibrates as one. So I guess it could be a felt vibration...

Thanks for the reply. The F2560 has 925 hrs. on it. The engine mounts seem solid. If they were wore or lose wouldn't it rattle all the time? It seems to be running on all cylinders when checking the exhaust.

I recently bought a F2560 with a heated:) Curtis Cab. I really like how it works but I have a concern. When I start it up and let it run at an idle (@1200 RPM), the hood and lock pin for the hood "rattle" so that it almost sounds like a mini jack hammer. The air cleaner housing has bounced so...