Recent content by Pal03

I will second this used the Krazy Karpet as a liner on my old blower it worked great... just had to make sure the lower edge was fastened well so the snow could not catch the edge and rip it away from the rivets I used to fasten it in place.

Just my own experience but on my bx25d the first few snow falls I still had the BH left on and float would lift the front wheels with very little snow built up. Since that I picked up a second hand 3pt snowblower about 300 pounds so about half the weight of the BH and now I can push alot of snow...

Well my heater made it here yesterday now to put some of this info to work. hoping to get started on the install over the weekend as long as the snow holds off for another few days. nothing worse then having to shovel the driveway and look at the tractor parked in the workshop mid project.:eek...

I have to say vary nice. I am normally not one to care for how things look as long as it gets the job done but this one is impressive both features and looks great to boot.

Thanks for this my heater arrived yesterday so this will become a weekend job for me. Mine is not the heater made for the bx25d so it didn't come with install directions this will be a handy reference

I think mine is the same as I feel a lot of wind around my legs with the cab on it. But I still seem to have a problem with steaming/frosting up in colder weather. Hoping the heater will at least keep the front window clear. If not I may look into closing off the intake from the cab some how so...

Thanks I found it vary well explained I am sure this will help when I get started

Thanks for the reply's and welcome everyone. Currently this is still a work in progress I have collected a wiper motor from the rear window of an SUV think it will do the trick. depending on how it works out I may get a second one to go on the back as well since I have plans on putting a 3 pt...

Here are a few pic's of what I have done not the greatest fabrication job but it works:D, Pic 3 is of the current electric heater I tried but found that on frosty days it just doesn't cut it, all I get is a small spot cleared in the front glass if I turn it directly at the window in about 30 min...

Hi guys I am new to the forums and tractors in general. I just recently purchased a BX25D from the local Kubota dealer and have to say I am happy so far, loving that little machine. Now I am in the process of prepping for the winter season, I built a home made cab and now I was looking at the...