Recent content by Ob1kubota

That's exactly right and go look at this site...http://www.snap-titequickdisconnects.com/ because these are the type of quick disconnects that should be on a 2000 model LA450S loader. Look at the ops manual for loader disconnect procedure and just disconnect those three lines leaving the base of...

Big Joe Welcome and the way to really tell if you have a brass washer use a magnet to see if it will stick, brass will not, and I personally don't see anything wrong using a steel lock washer in it's place but would use a torque wrench on the bolt so you won't strip the threads from too much...

tyre welcome and I was hoping one of these L175 owners would pipe up with a cookbook recipe but if you have the WSM and a good level concrete floor with jacks and jackstands with handtools you can do it. :). Now what is this process " Cryo-treated " ? :confused:

Welcome Jaime and wow what a shame this all happened. I personally own an L2600DT S/N 51515 purchased in 2000 with several hundred hours and have always used SuperUDT and have never had any problems just cleaning the Transmission strainer and topping off the fluid to the center of the sight...

Ed here's what I'm talking about; look at the attachments. These are Kubota LSD. I'm just not sure if the B series has them....it could be the source of the noise. These clutches are noise producers under a load with wheel slipping, this may be his noise. :D

Okay Ed you ask me to explain and I did so in the most simplistic way possible under the circumstance. I've always been sincere up here trying to help and Milo strikes me as a person who goes above and beyond with a machinist background and would appreciated the advanced knowledge. You need to...

Ed over the years we have used several varieties of systems... depends on the customer application, whether A Class voltage, etc. The "hot' system now is the variable displacement electronic positioning, pressure compensated, load sense, fixed displacement closed center, fixed displacement...

Ah ha....:D I would be giving up proprietary info there, but the diagram is a very simple diagram of a test filtration system that can be used on both pressure or suction. A fixed pump with a variable flow device, parallel Compound gauges and separate fluid tanks one of which has a shut of...

Welcome Dirt! everybody get a nickname up here so here goes :D I did post a while back with Service Department Vic on the values of SUPER over UDT. In New York State I wouldn't be without it on cold friction start ups. Use the forum's search function for hydraulic Fluid and you will come upon...

Milo you are on fire with great ideas! Here's a thought with your latest project... in my business, ( Aerials ) we don't use any return filtration smaller than 20 Microns. There are several reason based off of particulate size and harm to the system why we have found this level of protection to...

Milo put some wording to your photos and Mr. K may use it as an article. Ed caught on to what you did but I not sure everyone else who views this post will. IMHO you made it mobile and at the same time the casters make it slobber proof as the cylinder relax. Very, very good use of space and safe...

I second that, my maintenance on an HST ( Fluid and filter changes ) fuel cost, etc... is considerably high than a good old gear tractor. Be glad you have it, just learn how to feel your way into gears ( don't grind them until you find them ) :eek: and you will be $$$ ahead :)

I hear you Ed.... it his move now...;)

Hey Ed I don't think there's anything wrong in the diff. I don't have that WSM is there limited slip clutches in the third member housing or just a solid pin locking the spool in for lock up? Anyway a little wheel spinning against a stump to prove it will save a tear down. :D We don't know if...

Two thoughts I'm looking at a May 97 sales brochure where the breakout force is rated at 1543 lbs about (700kg). I can't image hard clay has the tensil or compressive strength to shockload a rear differential. Were you spinning at near 2600 rpm cutting the clay? A shockload is all I can thing of...