ob1jeeper's latest activity
-
Oob1jeeper replied to the thread Backhoe control bracket cracked into.It's 100", so it must be a BH9x Thanks for the help in identifying it... ;)
-
Oob1jeeper replied to the thread Backhoe control bracket cracked into.Thanks for the dimensions. Will check it out tomorrow... ;)
-
OCould you please post a photo of broken end of the blade bolt. When you have replaced the broken bolt, slowly rotate the blade and make...
-
Oob1jeeper replied to the thread RC60-72H on b7200hstd.I believe that Dave has likely hit the nail on there head... -- If you find the shaft is NOT bent... 1- Make sure you are NOT...
-
Oob1jeeper replied to the thread Backhoe control bracket cracked into.What measurements should be taken to assist with identifying the model # ?
-
Oob1jeeper reacted to TheOldHokie's post in the thread Backhoe control bracket cracked into with
Like.
According to Kubota BH75, BH76, BH77, BH90, and BH92 were all options. The BH7x abd BH9x models are easily differentisted by physical... -
Oob1jeeper reacted to Runs With Scissors's post in the thread Backhoe control bracket cracked into with Like.
Nice job! I love having a welder. It's right up there at the top of my "Most Favorite Tools" list. The overlay plate sounds like a...
-
ONice job! Yeah, that doesn't seem like something that should break at all.
-
O"I love having a welder" too...... I wish I had learned to use it!
-
OThin metal with holes close to the corners, why would it not break? Poor design.
-
Oob1jeeper replied to the thread Backhoe control bracket cracked into.I am not sure of the model #, as I bought this tractor and BH as a used unit, with a 6" loader bucket, and ALL of the model stickers of...
-
Oob1jeeper replied to the thread Backhoe control bracket cracked into.Neither of the two holes were wallowed out, and the piece that was broken off was firmly retained in place by the one fastener which did...
-
OWas clearing brush this afternoon with the BH on my L3240D, when the BH bucket control suddenly stopped working. Was able to get it...
-
-
Oob1jeeper replied to the thread Another question about New BX23S .. Broken bolt on Backhoe.Positive...
-
Oob1jeeper replied to the thread Another question about New BX23S .. Broken bolt on Backhoe.The right stabilizer arm/leg for the BH (BackHoe) moves and articulates on its pivot, making it useable, but the pivot pin is stuck...
