Recent content by Nancy

  1. N

    L295DT-3 point hitch not working

    Recently changed hydraulic fluid, cleaned filter - everything worked fine. Used brush hog for about 1/2 hour, put the tractor away in barn. Now 3 point hitch won't lift brush hog. 3 point will go up slowly with brush hog disconnected, but won't go up if I stand on it. FEL works fine. Can...
  2. N

    L295DT - Can't engage gears

    Tractor was working fine. Climbed a hill using lo on the hi-low lever. Stopped at top to adjust brush hog. Got back on, moved hi-low lever to hi with gear shift in first gear. No movement. Can't get the tractor to move. Seems like it might be something with the hi-lo lever. Any...
  3. N

    L295DT hydraulic fluid leak

    Had a leak in curler cylinder of the loader. Had it repaired at a local hydraulic shop and had the control valve tuned up at the same time. Put new hydraulic fluid in. Everything seemed to work fine after reassembly but discovered some fluid leaking from the base of the PTO change lever...
  4. N

    L295DT w/front loader leaking hydraulic

    We inherited the L295DT when we bought our property. The manual the prior owner gave us doesn't reference the front loader, nor does the repair manual we purchased. Not a problem until while moving some dirt the hydraulic extender and retracter shaft that curls the bucket sprung a leak right...
  5. N

    L295DT hydraulics

    Wow, that project is impressive. We have a L295DT that we were just told needs a new drive shaft and coupler. Any chance you have a picture of what that is? The repair shop folks said it can't be repaired - they can't get the parts. They offered to put the snap ring back on and try to wire...
  6. N

    WTB L295DT parts

    Hello! We are located in Pennsylvania near Butler and have a L295DT. We recently learned that the drive shaft should be replaced. The repair shop told us they can't get parts and can't fix it. We feel like they just want us to buy a new tractor. Have you had any success in finding parts...
  7. N

    L295DT Making Grinding Noise

    Hi Vic: I'm sort of mechanically able, I do have the shop manual and I have changed the transmission fluid. I don't have the manual with me right now (I am at work). Is removing the top of the transmission something you have to have experience to do?
  8. N

    L295DT Making Grinding Noise

    Thanks very much for the help. The noise is not present when the tractor is in 2 wheel drive - just 4 wheel drive. The noise is there when the tractor is in neutral, clutch out, in hi and going down a hill. I didn't remember to try it with the hi/lo in neutral as well. Will do that later...
  9. N

    L295DT Making Grinding Noise

    I only tried it in first and reverse and it make the noise in both. Thanks for your help.
  10. N

    L295DT Making Grinding Noise

    Hello - first time poster. I have a Kubota L295DT. On Monday I was smoothing ruts out of the driveway with a box spreader in the pouring rain. The tractor was running fine, no unusual noises. As I was finishing up I stopped the tractor to shift into a higher gear to travel to the barn. I...