Recent content by Millennial

There are numerous companies out there that offer tuning solutions for newer trucks. There are plenty of tuners to be found in every state. There is nothing that "retards the timing" when you program a vehicle or piece of equipment to remove the emissions. All you are doing is telling the...

Don't know if anybody has tackled this yet, I'm sure we could get some work done on this. I own a 2013 F350 6.7L Powerstroke that HAD the new DPF and DEF and EGR. Well what did I do because even though they claim they almost have it perfected, it's far from it. I tuned the truck and deleted the...

Hows it going guys! I've been reading through all the old threads, but not really sure if I am understanding correctly. I have read about keeping the ratios within 2-4% with 2% being more acceptable on a 4WD tractor. I have just a 2WD tractor, so does that still apply to me? The tires that are...

Hmm. I appreciate the words. I made the video based on another video by Vic that deals with the clutch Throwout bearing. In his video he said it did. Sorry for the bad information, I'll remove the video ASAP!

Delete please Bad information edit. Disregard.

Ok, no problem we are supposed to help each other. By chance would you take a look at your oil level and fuel level. What your describing is a runaway on a diesel. This happens when oil or another oil type substance gets into the cylinder and the engine "runs away" on the oil and starts going...

Make sure your linkage is all working right to the fuel lever. Was there any blow by on the tractor last time you ran it?? Also what RPM did it run at and did it keep climbing or hold steady at wide open?? Pictures would be great too.

They were on there when I got it, I just removed them to clean them up real good. Yeah there is a trick with the pulley. After you get the pulley pushed back in the pto shaft, you use a 3 claw puller. The stupid taper lock flange will come right off

And Santa came early this year and gave me an older woods 5' finish mower!! I got it in the back of the truck and am gonna unload it with a neighbors front end loader in the morning. Blades need sharpening and the deck needs some new paint and grease! Here are the pictures for everybody else who...

Sorry about the pictures. I also forgot to say that it came with the 3 point hitch arms. I just have them off to break them loose and grease all the adjustments, which is proving to be a pain. I am not sure what to think about this tractor as far as wear and tear. Everything was in pretty rough...

How's it going guys. Just bought a very used B8200 that runs really good but seems that it was neglected for some time. Also the whole body panels on this thing are completely rusted out, so in the future I'll be in the hunt for a new body. I bought it to mow my lawn but dang Finish mowers are...