Recent content by jbilling

Just got a new M5-091 and wanting to install a block heater. Block heater kit says to remove threaded plug and install heater. I can't find a threaded plug. Does anyone know of location or do i have to buy adapter and knock out a frost plug.. Thanks Jon

Hello all, My dealer quoted me a new M7060HDCC12 with an M21 loader. I gave go ahead to get in and now he tells me he can't find an M21 loader wants me to take an LA1154 instead. Its $1000 cheaper. I can't find any specs on the M21 loader to compare. Does anyone know or have specs on the M21...

thanks for replys and feedback guys. Weighing my options right now. Looking at a new 7060hdcc12 replacement. Few of the dealers i have spoken with were shocked at the 2100hrs in 3 1/2 years. I use this in a commercial environment with mulitple staff using. They all feel the hydrastatic drive is...

Appears I have major internal issues. Decided to change hydraulic oil and filter to see if it helped with issue and when i removed hydraulic filter the magnet on filter is full of metal shavings. Not real happy. At a minimum dealer figures PTO clutch is destroyed and roughly $4000 to fix and...

Its driving my snowblower. Im not convinced at full 540RPm but enough to blow snow.

I have a 3540HST with electronic PTO engagaement. The pto is not disengaging. When you turn off the Pto switch it shows as disengaged on the display but the pto is still engaged. Any ideas? Thanks Jon

I have a 2007 3240HST with cab. I am having a problem with a hydraulic leak when the tractor gets worked hard and builds heat. Either with a bunch of loader work or a snowblower on the PTO or a movwer deck. Once you have used it for awhile it will start leaking hydraulic fluid out a little...

I have a 2007 L3240 HST. In the last two days Error 40 is coming up on dash and tractor will not move. Don't seem to do anything and will start driving again. It has gotten worse over last two days. Shop manual isnt a whole lot of help in diagnosing. Refers to sensor/ground/or voltage. Any...