Recent content by GhostRider29

I decided to order two new o-rings for the suction pipe. Should I add gasket dresser on them when replacing the o-rings?

I forgot to add one more thing, I’ll check the o rings where the suction pipe go to the transmission. Will the fluid flow out?

I tried what you suggested, nothing happened so I added 1 qt more fluid then went thru the same procedure such as blowing etc. The fluid came out of the breather tube on the top of the pump housing

Thanks for the tips, I did not have the chance to work on my tractor today. For the hydraulic pump, which one? By the motor (right side) or on top of the transmission. If there’s a suction leak, should the hydraulic fluid leak out too? Michael

Thanks for the suggestion, I’ll check on it tomorrow. I’ll try to figure out where the suction line is. I’ll let you know if the problem is solved. Again, many thanks.

My 2006 B2710 HST with FEl was working fine before I had to do a timely transmission fluid and filter change. Now the power steering, FEL, and 3 pts hitch aren’t working except the drive part. I left the engine running at medium speed for about 20 minutes to see if the hydraulic fluid would...