Recent content by EZOilburner

Thats provably something that has been debated here, it is routed to a electric pump thats activated by a temperature switch going to a relay. I had issues with this tractor reaching temperatures in the summer that where too much for my comfort (over 230f after flushing and all kinds of...

The part arrived from White house on Friday and I was able to install it on Saturday though the rain made it difficult, it sure is a tight fit and the IN/OUT pipes need some help to line upto the new HP, also the two bolts on the front are almost impossible to get started due to the space being...

Thank You, I'm ordering it now. There are 7 hoses I believe but I'll check to make sure. Thank You for taking the time to explain this.

Is this the part number I'm looking for? 5P1/41040GPO Somehow it doesn't look exactly the same to me.

I will do a search, hopefully there is a part number to order a pump, the service manual I have has lots of detail but no part numbers. Here is a picture from what I think You described, looks like the relief is there possibly? If so wonder why it cracked the pump then.

Hi and thank you, the attachments are the front loader, 3 point in the back which I was not using and a belly mower that wasn't connected. I have not seen a relief valve, thanks for the diagram I will check again, the tractor is all factory afaik, the attachment has been therefor a long time, I...

The hydraulic pump on my tractor cracked on the engine side of the pump. I'm not entirely sure why this happened as I do not abuse the tractor. I've read a few threads and still have a question, are there any upgrades for this? I will be fine with the same pump but I'd like to know in case its...

Got it thanks again guys I will try tractor supply and Napa next

I found this on eBay I'm not sure if it's the one you guys are referring to apparently they are a set of bearings I only need the one for the idler pulley but I might as well change both Btw the local part store didn't have it in stock...

Wow thanks guys I will try removing it first and see if that does it.

The one on mine is starting to squeak, I looked at the shop manuals and can't even find a part number. I will appreciate if someone has a part number or a way to service it. Thanks.

Thanks for the reply, the radiator is spotless, no oil at all and very clean inside and out. I hope it isn't a HG but nothing else seems to be the problem and the curious thing is it only does it when using the mower but other times its fine.

Yep that's what I was thinking, I can't see any other explanation but also I noted that is only does it when powering the mower deck and not as much when using the loader. Thanks again.

I measured the temperatures on top and bottom of the radiator hoses and it does drop about 40F but the temps still get high when mowing. I also looked at the radiator inside (after pulling it) cleaned everything I could see but it still gets hot when the mower is used but the mower moves freely...

I will take the temperature at the bottom to see what is the drop now, then pull it and clean it well (I've already cleaned the outside thoroughly) in case there is any debris inside and check the temperature again. Thanks for the tip, I already ordered a12v pump and temperature switch in case...