Eldo's latest activity
-
EEldo replied to the thread z125s zero turn, 54” belt rubbing against itself.Yep, it was the wrong belt. Apparently, the deck SN matters sometimes. This is a good place to look things up...
-
EEldo replied to the thread z125s zero turn, 54” belt rubbing against itself.Thanks all! The aftermarket belt was either the wrong model or had stretched. Double-over, it was about 2.5 inches longer than the OEM I...
-
EEldo reacted to lugbolt's post in the thread z125s zero turn, 54” belt rubbing against itself with
Like.
wrong belt or perhaps one or more idlers or spindle bearings are worn/loose. I like to remove the deck from the mower once a year... -
EEldo reacted to North Idaho Wolfman's post in the thread z125s zero turn, 54” belt rubbing against itself with Like.
Yep wrong length of belt!
-
EEldo reacted to biketopia's post in the thread z125s zero turn, 54” belt rubbing against itself with Like.
The off brand belt might of been ok at first, but has stretched to the point it will fail you. Get you a quality name brand belt either...
-
EEldo reacted to Mowbizz's post in the thread z125s zero turn, 54” belt rubbing against itself with Like.
Relative to my interests as well. I have a Z422-54
-
EEldo replied to the thread z125s zero turn, 54” belt rubbing against itself.Thanks very much, all. I will just head to my deal and pick up a genuine OEM. I'll follow-up here with the results for anyone else...
-
EEldo replied to the thread z125s zero turn, 54” belt rubbing against itself.Hi Jason. I got the belt in Nov 2022 and it started rubbing late last Summer. I haven’t messed with it since last Fall when I parked it...
-
EEldo posted the thread z125s zero turn, 54” belt rubbing against itself in Service, Repair & Maintenance.Good Day! I am pulling my hair out over this. The belt on my k125s (54” deck) is rubbing against itself where the tension pulley meets...
-
