Recent content by caper

the lower turret piviot on my hoe would have trouble getting and also the universals on the PTO shaft for my blower (when installed) would be trouble also. Just too big and cumbersome , to each their own if they like it , but myself I have no issues with a regular adjustable end , the only...

Just be advised I know of 5 zerks minimum on a BX25 that you would never even come close to getting at with that unit , nor any of my driveshaft universals on my Toyotas and other vehicles , so before you spend the big bucks on an unnecessary novelty item IMO , ya gota ask yourself if ya want...

They sound like they are more hassle than what they are worth and slip off often and cant fit in tight areas. what ya want is a pistol style grease gun to leave one hand free to hold fitting on zerk , with an adjustable tip and you can fine tune it to fit perfect and eazy removal as in my pic ...

my recommendation is any "one" hand operated one, frees up the other hand to hold fitting on , another tip is don't use the air bleeder on top , put tube in and screw cover on only 2-3 threads ,then release piston , pump a few times until you have grease coming out then spin cover on all the way...

lol I grease any pins after every time I use it , just can't go on thinking my pins are not floating on grease , I have 6 grease guns all with different types of grease for different applications , remember moly only for pins and EP2 for HST peddle on a BX25 , yes I may need help with my...

I use a small used tooth brush as it fits into the tight areas and wipe excess grease off around joints with that and scrape the grease off of tooth brush into a used coffee cup as I go ( Tim Hortons for the win ) , than spray area wit WD 40 and wipe away , WD 40 on a rag is the answer .