Recent content by brady-yzf

Tried that originally, but the main bearing gets pushed out by the spring. I notice that its tougher to find the sweet spot between full bucket downpressure and floating, but other than that, it seems the bearings have no necessity. There is also a smaller cup within the larger cup that I...

On my Kubota L35 I took the loader control valve body apart trying to diagnose a problem that turned out to be unrelated. At the bottom of the valve there is a cylindrical cup over the bottom of the spool. I pulled this off the bottom of the spool and out popped a bearing and a spring. The...

Fixed! thanks Vic I dont' exactly know where the little piece of crap was, but I cleaned the pump and the relief valve, and now she's fixed and ready for more abuse! Thanks for the help- Brady

Well, I can tell you what it's NOT. I dissassembled both the backhoe and the loader valve assemblies as well as replaced the seals in some of the hydraulic pistons that weren't working properly. I dissassembled and inspected all the quick connects to make sure none were obstructed. Perhaps...

Mark, Sorry about the delay, I forgot to bring my manual to work so that I could reply. It turns out that the steering on my L35 is nothing at all like yours, mine is part of the main hydraulic system

I've got an L35 manual I could share, I bet they're similar, let me know if you want it.

I'm getting a hydraulic whine and it feels like the pump is laboring in my 2001 L35 whenever I am not moving my loader bucket either up and down or rotationally. The fluid and filter is brand new and all other hydraulics are disconnnected. Here is the chronology: I first heard the whine when...