Recent content by boozaro

Definitely want a hi/lo. And thanks for the advice on the LED. That narrows the search. I've got the original work lights on the cab. But I purchased LED replacements last year. I just need to wire them up. Seems like there's always something a little more pressing that keeps me from doing it...

Thanks, FFOTS. I prefer the hi-lo, but your link did give me a clue to the base type. So that's huge. Thanks. At least now I know what type of bulbs to look at. Now just to find an LED that will work well - and not quit after the first week. Seems like a lot of those out there. Thanks again.

Here's the bulb - on the bottom there are (2) raised contacts. There's also a small tab around the collar that isn't pictured. Based upon Firefighterontheside's reply - it looks like the base is PX15D or H6M. They appear to be the same. Thanks, Wolfman. If anyone has a bulb they recommend or...

Hi all- I've got a L3710 that I'd like to put some new headlamp bulbs in before winter takes a giant white dump on me. I took the bulbs out but can find no identifying numbers. I search online and found Kubota part numbers - but nothing I can use to point in the direction of a replacement. I...

You know what, you're absolutely right. I was so deep into stressing over the Great Pumpkin, I forgot this was more than just a free forum. Done. Lifetime Member! :) Worth every penny.

You were right on, Dave. It was two of the keys. One had a whole second ground in half. I got it all back together and put her to work today. The Great Pumpkin lives! Thanks again for your help! And the diagrams. They made getting parts a breeze at the local shop. Thank you again! Have a great...

I would like to offer my sincerest thanks to the admins and members of this site. I recently acquired an L3710 with several attachments - an L-2052-1 snowblower being one. I've had numerous issues, but thanks to the folks on this site, I have been able to overcome every issue. No way could I...

I am just about done rebuilding this blower from the ground up. With help from people on here!! Last question...the idler pulley that adjusts the tension of the chain turning the auger...does it go on top, pushing down on the chain OR does it go under the chain pushing up for tension? Thank...

Thanks, Jeff. That makes sense, but I didn't want to overfill and later find out that's the reason my blower blew up. Thanks again! Scott

Okay - so I rebuilt the snowblower gearbox and the reduction box. I know the type of oil to use, but how much? On the gearbox there is one plug. No other holes. Do I fill it with it in the horizontal position - so about half full? Orient is up/down and fill the whole thing? The reduction box...

Hi Dave- I hope you had a Merry Christmas. Well, I am back into the heart of darkness. I've got the gearbox and reduction box both removed and cracked open. The diagrams you provided are excellent, but they don't really show where those keys are. How would I know if they are broken? One side...

Dave- You sir are a rockstar. I kind of narrowed it down to the gear box, and started taking it all apart this evening. I've got the gear box of, as well as all the bolts. Is there a trick to cracking it open? Also, is SAE90 the oil I want to put back in the gear box and the reduction box? Side...

UPDATE: So I checked all the shear pins are all intact. Also, interesting to note - when I manually turn the auger blades or the propeller blades, the chain turns, the shaft going to the gearbox turns and coming out of the gearbox, the drive shaft turns. If something were broken or damaged in...

Greetings again - So we finally got some snow and after about 3 hours of moving snow I took a break. When I returned and started the Kubota up, the auger wasn’t turning. The driveline going into the gearbox is turning. The shaft coming out and going to the chain gear is not. My plan is to...

Thanks for the replies gents. The temp was hovering around freezing, so I was probably pushing too hard. I'll give the chute a spray and slow it down. Thanks again for the replies. Merry Christmas! Scott