Recent content by bobkubota

My dealer says it ended 6/30/19 but the Kubota build site say end of August 2019. What is going on? Very confusing.

Thanks to everyone for their advice. I have a buyer for the L3650 in as is condition. A new L2501 is in my future. And after watching several YouTube videos of the L2501 mowing taller grass and weeds and some brush mowing I am sure the L2501 will work for me. Now I need to figure out if I go...

I have an L3650 with a great lift and the tractor runs great. Has 1200 hours running time. But it needs new rims and tires. This is a calcium issue. It also has a front axle leak. Looks like 3 to 4 thousand to fix. Rims are expensive and after market is not available. L3650 was made in...

Does anyone have a source for standard front and rear wheels for the L3650? Thought these would be easy to find but I am having trouble. Help appreciated. thank you.

Thank you for the link. I did review the manual. What I need to do to get to the safety switch they assume a mechanic would know how to do. To get to the switch that throttle lever handle has to come off. That will take a puller. Also the steering wheel will probably have to be removed...

No adjustment possible without removing the cover. It works correctly 75% of the time. So I assume it needs adjusted. But the cover around it has to come off. So I have to get the throttle lever off the throttle control shaft. The safety switch should not cost too much so I will probably...

I have been having trouble with the neutral safety starting switch on the forward/reverse lever. And I want to adjust or replace it. My problem is that I can not get the throttle lever off of the rod that controls the throttle. This lever has to be removed before the plastic cover over the...

All of your replies have been very informative. The lens in the gauge has been the same dull white since I purchased the tractor 4 years ago. I know the tractor was low on hydraulic fluid a few days ago as it was not running the lift without making a noise. I added 1 1/2 gallon of fluid...

Thank you for the reply. I'll call the Kubota dealer and get one ordered. This should be something I can do. bob

The bubble gauge on my L3650GST used to check the hydraulic fluid is no longer clear. This is not a problem with the fluid becoming milky but rather the gauge lens is just no longer clear enough to see the fluid level. Is this problem common? Is it hard to repair? My L3650GTS was purchased...