Recent content by BlownL67

I had this for a project, but it is no longer needed as I got the correct subframe for my B8200. According to Woods, this will fit a B1700, B2100, B2400, B2410, B7300, B7500. Please do your homework to make sure, but this is what I came up with my research. These subframes are nearly impossible...

I finally got all the parts and subframe mounted for my B8200. I mounted the Cessna pump but cannot figure out where the anti rotation bracket bolts to the tractor. Can anyone lend a picture of their setup ? Thank you!

Thank you for the reply! I have not removed anything at all except for the weighted crank pulley which still has its marks on it. So unless I removed any of the gears, just leave it alone then ?

Last week the water pump seized up on my B8200. I tore it down and realized the thermostat housing was broken as well so I ordered that. I figured while I had the front gearcase cover off I would replace the oil seal and O ring while I was in there as well. After I cleaned everything up, I...

I finally got a subframe and components with my B8200 and Woods 750 backhoe. She is almost ready to mount except I am missing one of the front brackets. Since they are no longer available at all, I was wondering if someone had one off their machine so I can get some good pictures and dimensions...

I got very lucky last week and found a gentleman parting an old B8200 which had a backhoe. Most of the backhoe totally hammered and missing too many parts to even bother salvaging. Anyways, I was fortunate enough to get the subframe, brackets, pump, top link, frame spacers, and a few other odds...

I have a subframe I am purchasing. I will not 3pt the backhoe.

Looking for a used 650/750, 6500/7500 65/75, or 4520/4530 for my B8200. I am located in Massachusetts and can arrange freight if the deal is right.

Is the subframe for the 3750 ?

Since there hasn't been any luck on thr trade front. I'll take offers for the loader.

Looking for a B4520 backhoe or Woods equivalent. Looking to trade LA402 loader. Loader only, no subframe. Barely used, just sat outside for a few years. Located in Western Massachusetts

I have a LA402 available for anyone interested. Send me a private message.

Sent you a private message. Can you possibly take some pictures of the subframe and bolt on points to the backhoe if possible ?

Thanks for the reply. I spoke with the guy at Woods this morning and he said the subframe kit will only support Groundbreaker 6500/7500 and BH65x/75x, but will not fit the older 650/750 models and he couldnt explain at all even though the backhoes seem almost identical. He was able to send me a...

My main question was whether or not I can use a 3pt backhoe and swap a subframe onto it. Ironically enough, someone from Woods got in touch with me this morning and told me I can yank 3pt off a backhoe and bolt on the appropriate subframe.