Recent content by bherpin

  1. B

    Alamo RX 72 Reviews

    I picked it up for $600. It cuts good but has a slight vibration to it. I've ordered some new blades for it. It appears that the pan has a slight bend or is not seated properly because when I measure the clearance on one end then rotate the pan 180 degrees and remeasure it has about an inch...
  2. B

    Alamo RX 72 Reviews

    I'm looking at purchasing a used Alamo RX72 mower that I found online for a decent price. Owner says it works great but I can't find any reviews for this mower. Anybody have any experience with this brand? Pros - Cons? I plan on using it for my bush hogging service so it will be used mostly for...
  3. B

    L4330 3 Point Is Getting Weaker

    I bought a used L4330 with a Woods FEL last year with 1400 hours on it. I sent it to the dealership to go through everything, change the fluids, etc. Once I got it back I then purchased a Bush Hog ATH 900 finishing mower from a friend of mine. I know this mower is too big for the L4330 but it...
  4. B

    Blowing a 5 amp "key stop" fuse

    Did you ever figure this out? My tractor started doing the exact same thing a couple days ago and I have gone through a pack of fuses since then. I can't see any noticeable wires rubbing or anything and I'm hoping it's just a simple fix so I don't have to bring it to the dealership..
  5. B

    L4330 Just Shut Down While Operating

    Well, After digging around a bit it looks like the #9 fuse was blown which I believe is for the key switch. Kind of odd that the Mid PTO light would come on for the key switch fuse when I don't even have a Mid PTO but anyway that fixed the problem. Back up and running.:D:D:D
  6. B

    L4330 Just Shut Down While Operating

    I was moving some dirt with my Kubota L4330 yesterday when all of a sudden the engine just shut down. I quickly looked down at my instrument panel while it was shutting down and the only light that came on was the Mid PTO. Now the tractor is completely dead. The instrument panel lights up but...