Recent content by alumley

More details and clarification as requested: Number of hours and years with this engine? 650 hours, 17+ years that I've owned it, had 25 when I bought it. Air filter and intake clean, filter changed? Filter is from 2017 so nearly new. All the intakes are clean Valve lash ever set, how long...

Good approach! Full disclosure: When single digits I had a gelling problem and diesel 911 got me out of that jam. I had to remove the filter assembly and add the 911 50/50 and it started right up. Ever since then it's been this way. Yesterday I thought about removing the injectors so removed...

No, not specifically but I'll give that a try.

Suddenly it's very hard to start and will belch out lots of black smoke before it eventually starts. Once started it runs OK but under the slightest load it will belch black smoke whereas in the past it would only do this under a very heavy load (e.g heavy snow). Glow Plugs are all good...

Thank you for the feedback and photo of how it's supposed to look. I'm going ot dig into this later today and I'm starting to agree that it might be the wrong part as it is further out of alignment then it was before.

North I, in your first reply it says: Assist with the picture: http://drive.google.com/file/d/13zTQ...ew?usp=sharing __________________ The tool to attach an image only offers a link to a URL which is listed above. Thank you,

North I.... picture link should work fine. Be sure to highlight the whole thing and paste into your browser in case it's broken (the link). http://drive.google.com/file/d/13zTQxNHGc06itlXQsiP3T2wxOP9i9_RH/view?usp=sharing I'll double check the parts, they looked the same as the old but maybe...

I have a G6200 HST serial # 33808. The inner most belt got torn up and I noticed that the tension pulley was not exactly lined up. The arm was a bit worn so I replaced both the arm and the pulley but this did not help at all as that inner belt is obviously wanting to ride half off the rear of...

I don't know the exact type but it happens on the back of the transmission. BTW, this is an HST.

Anybody willing to share how to adjust the parking brake on a G6200HST? 567 hours total time. I see the spring tension adjustment but this make no difference. Thank you, Andy

The shaft that drives the hydraulic pump on my g6200hst let loose and to gain access to it I'd like to remove the decking (fiberglass that forms the body) but the sticking point is the forward/reverse pedal that won't come off. Any suggestions? Plan "B" will be to remove the mower deck and...