Go Back   OrangeTractorTalks - Everything Kubota > Members List

VIP Service Tech

North Idaho Wolfman North Idaho Wolfman is offline

Visitor Messages

Showing Visitor Messages 1 to 10 of 31
  1. Stitchit1
    Hi Idaho Wolfman. I used to have your first name but for some reason my pms dissapeared. Iím hoping you might be able to help me,..... Iíve had my eye on this for some time. Iím just not sure if you think itíd be good for picking rocks/boulders. Preferably from the ground. Just lower, grab, & go. This is Home made. I know the hoses are shot. But do you think the cylinders are sufficient? Also do you feel itíd have proper reach to pull//haul rocks that a L3200 is capable of?

    Thank you in advance! He wants $700. I talked him down to $550. I know you know more about these than anyone.

  2. Denny Gordon
    Denny Gordon
    I'm trying to put back together a b 8200 that was taken apart by someone else. I'm about to reinstall the oil pan but I need to know the torque specs. The drive shaft that goes to the front differential for the four wheel drive is also removed. Wondering if you have torque specs for those bolts that mount to the front diff
    Denny Gordon
  3. al m
    al m
    Hi Wolman,you have been a great help so far,and wonder if you have access to information that might help in sourcing a tranny for my b1750. Dealer tells me I need a 66415-11600 ,that subs to h6640-10600. His tech says a used one out of a f2400,b1550,b7100 will work.i can get a screaming deal on one out of a f2100 2wd. Only info I can get shows the tranny case on the f2100 and my b1750 with the same part #.you have any direct knowledge of this?
  4. 50shootr
    Hi, have a b6100d,front hydraulics don't go up or down left or right,3pt hitch is ok,I turned the selector handle to the proper side,the tractor sat all winter 1st start up, I power washed the actuator block & got water inside the up/down side now the shaft sticks forward,I'm going to replace the block anyways. Thank you for your help.,also do you know of a on line source for hydraulic parts ?
  5. Crazy Horse
    Crazy Horse
    Hey Sean, so new problem.
    My tractor started dying yesterday, noticed that the fuel filter canister was running low, out of fuel. So I took the filter off, the canister had a ton of rust, chunks of rust in it. I put a new filter in, but it's still dying every couple minutes, and the canister is still running out of fuel. Is this because I need to bleed the lines, or is it blocked lines, fuel pump or bad fuel tank? Appreciate the help
  6. coachgeo
    yeah... glad you came in Vic cause your the only one of us that can ban an IP address. Myself and Wolfman been axing the same person's spam for couple days now.
  7. Service Dept Vic
    Service Dept Vic
    Holy Hell! Talk about a spam attack! Nice work!

  8. Roll
    Wolfman... Having that same problem about not being able to post because my tokens have expired. I checked the FAQs but found no reference to tokens. Is this caused by something I am doing? Thanks for any help, Gary (Roll)
  9. poyjas
    Hi Wolfman, noticed you seem to be darn close. I've a place just south of you I think, on E Garwood Rd about where Hooker Hill Rd comes in. Maybe we'll have a chance to compare notes sometime on our B7100s. Sure enjoy your posts, you always seem to have something interesting/informative to say. John
  10. 85Hokie
    Hey Sean,

    you got a WSM for B7500hst by chance ?

    Not for me - the AG boys (shop next door) are gonna need it !

About Me

  • About North Idaho Wolfman
    Sandpoint, ID
    L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat, and more
  • Signature
    Some days you're being chased by the wolves,
    Some days you're running with the pack!


Total Posts
Visitor Messages
General Information
  • Last Activity: 37 Minutes Ago
  • Join Date: 06-09-2013
  • Referrals: 0


All times are GMT -8. The time now is 02:03 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.