PDA

View Full Version : B5200 belly deck


kubotamedic
03-19-2009, 05:39 PM
I just bought a B5200E with a 48 inch belly mower, my question is..... it seams to sit a little a little off center kinda to the right, could it be that there is a bar that goes from the fram to the deck that could be missing that keeps it centered. If anyone could help me out on this I would greatly appreciate it.

Service Dept Vic
03-21-2009, 12:15 PM
Possibly. Can you let me know the Model number of the deck?

kubotamedic
03-23-2009, 05:19 PM
B5200 belly mower Part number RC-48-**F. Thanx

Service Dept Vic
03-24-2009, 09:16 PM
There is a pretty elaborate parallel hanger arrangement for that deck.

Should have a 4 mounting points of contact, with a fifth attachement point just under and to the inside of the RH footrest. (excluding the cable mounts from the 3 point)

Do you have a manual for the deck?

They take a little adjusting periodically to keep them in line, level and adjusted. We have a feature on Deck Service/Leveling comming up.

Let me know if you need a manual for the deck.

kubotamedic
04-04-2009, 02:49 PM
Yes I could use a manual for this deck, what will that cost me? Thanks