Kubota L240 Stater

[jbnlyn]

Hello, I'm new to the site, first post.
I'm having trouble locating a starter for my L240 tractor. There isn't any info on the starter and I don't know what the US equivalent crossover model is for the L240, or what other models are the same. Any help would certainly be appreciated.

Thanks, jbnlyn

[Ob1kubota]

Welcome jb to the forum. I was hoping someone had the specific P/N but as aging as this post goes, I will try to at least give you a positive direction to pursue. Without a WSM ( Work Shop Manual ) available you will have to do it the old fashioned way by removing the started from the clutch housing to measure the number of starter teeth and the size of the reduction gear that matches the flywheel. The starter housing mount (bolt) pattern must be matched along with the cranking direction for a replacement. ;)

As old as this model is, ( circa 1977 ) I would remove the starter and take it to a rewinding shop and let experts rebuild your original starter. With a new solenoid, bushings and new reduction gear, ( assuming the stator & rotor are in good shape and not locked rotor) your starter will be better than new because it has been heat treated over the years to the existing housings which have worn together like a team during start up. :)