View Full Version : L2402dt front axle
takattack
05-17-2009, 03:39 PM
i tried to change the oils at the front axle on my kubota. there are 4 filling plugs. 2 on the axle and another 2 lower on each wheel, but there are no indicators on the filling port plugs. so how much oil do i have to put? there are 3 drain plugs. one in the middle and one on each wheel....
Service Dept Vic
05-17-2009, 09:56 PM
The middle drain plug will drain the center diff carrier and axle tubes.
The two outer wheel drains will empty the front wheel gear bevel drives.
Fill the front wheel gear bevel drives up to just below the bottom of the filler plugs on each side (they are independent) and fill the axle tubes up just past half way mark in the tube. 80W90 is fine here.
takattack
05-18-2009, 12:24 AM
thanks Vic...
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.